While Linux operating system booting first,
1.Login to Linux OS.
2.Goto terminal and login root.
3.Type vi /boot/grub/grub.conf
4.Set timespace=-1
title Windows XP
rootnoverify(hd0,0)
chainloader +1
Wednesday, December 15, 2010
How to boot linux OS from pen drive
Preferred Ubuntu Operating system:
1.Goto sytem menu.
2.There click the option Startup Utility Manager.
3.Choose source as your iso of your OS from DVD or image drive.
4.Insert your pen drive and choose as destination.
5.Then click finish.
6.In BIOS settings change the first boot device as USB Jet flash.
1.Goto sytem menu.
2.There click the option Startup Utility Manager.
3.Choose source as your iso of your OS from DVD or image drive.
4.Insert your pen drive and choose as destination.
5.Then click finish.
6.In BIOS settings change the first boot device as USB Jet flash.
Sunday, December 12, 2010
How to install PRO-E
This is the ProEngineer 3.0 M90 Patch,but also work on ProEngineer Wildfire 4.0 C000
1.Insert the Pro/Engineer Disk 1 CD.
2.Autorun will open CD if not click Setup.exe
3.Take a look on the left corner in the bottom, that is your actual "HostID",remmember that number or write somewhere on paper.
4.In a "CRACK'' folder find file "ptc_li-4.0.dat" and copy somewhere on your HD.
5.Open "ptc_li-4.0.dat" with ''Notepad" and replace every occurance of with your "HostID" shown in the bottom left corner of the ProEngineer setup.The best an the fastest way is like this:
1a) Open "ptc_li-4.0.dat" with ''Notepad"
2a) In ''Notepad" klick "Edit" and "Replace" (Ctrl+H)
3a) in a "Find what:" paste ,''Replace with:" paste your "HostID" shown in the bottom left corner of the ProEngineer setup.
4a) Klick "Replace All"
5a) Klick "File" and "Save"
6a) Exit "Notepad"
6) Click "Next"
7) Check "I Accept the Agreement Terms and Conditions"
Cool Click "Next"
9) Click "Pro/Engineer Pro/Engineer Mechanica"
10) Change the Destination Folder to "C:Program FilesproeWildfire 4.0"
11) change the red X to ?Install this feature? for the following:
1b) Pro/Engineer Mechanica (If you want this with Pro/Engineer,if you don't want do not change)
12) Expand the "Options" feature change the red X to ?Install this feature? for the following:
1c) J2RE 1.4.1
2c) Mold Component Catalog
3c) Pro/Plastic Advisor
4c) VERICUT (R) for Pro/ENGINEER
IMPORTANT NOTE: Do not install the "J2RE 1.4.1" option if you already have a newer version installed on your system.
13) Click "Next"
14) Click "Add"
15) On license-config screen select "Locked license file (no server running)" and point to edit ptc_li-4.0.dat
16) Click "Next"
17) "Shortcut Location(s)",check "Desktop" and "Program Folder",change the Startup Directory to "C:tempProE" (this step is optional)
18) Click "Next"
19) On this screan is more optional configuration, make sure all boxes remain un-checked
20) Click "Install"
21) The installation process will begin?..
22) When ask you remove Disk 1 and insert Disk 2.
23) Click OK
24) The installation process will continue?.
25) Remove Disk 2 and insert Disk 3
26) Click OK
27) The installation process will continue?.
28) Remove Disk 3 and insert Disk 1
29) The installation process will continue automatically
30) When the installation is complete, click Next.
Read more: http://wiki.answers.com/Q/How_do_you_install_pro-e_3.0#ixzz17sdJJHjq
1.Insert the Pro/Engineer Disk 1 CD.
2.Autorun will open CD if not click Setup.exe
3.Take a look on the left corner in the bottom, that is your actual "HostID",remmember that number or write somewhere on paper.
4.In a "CRACK'' folder find file "ptc_li-4.0.dat" and copy somewhere on your HD.
5.Open "ptc_li-4.0.dat" with ''Notepad" and replace every occurance of with your "HostID" shown in the bottom left corner of the ProEngineer setup.The best an the fastest way is like this:
1a) Open "ptc_li-4.0.dat" with ''Notepad"
2a) In ''Notepad" klick "Edit" and "Replace" (Ctrl+H)
3a) in a "Find what:" paste ,''Replace with:" paste your "HostID" shown in the bottom left corner of the ProEngineer setup.
4a) Klick "Replace All"
5a) Klick "File" and "Save"
6a) Exit "Notepad"
6) Click "Next"
7) Check "I Accept the Agreement Terms and Conditions"
Cool Click "Next"
9) Click "Pro/Engineer Pro/Engineer Mechanica"
10) Change the Destination Folder to "C:Program FilesproeWildfire 4.0"
11) change the red X to ?Install this feature? for the following:
1b) Pro/Engineer Mechanica (If you want this with Pro/Engineer,if you don't want do not change)
12) Expand the "Options" feature change the red X to ?Install this feature? for the following:
1c) J2RE 1.4.1
2c) Mold Component Catalog
3c) Pro/Plastic Advisor
4c) VERICUT (R) for Pro/ENGINEER
IMPORTANT NOTE: Do not install the "J2RE 1.4.1" option if you already have a newer version installed on your system.
13) Click "Next"
14) Click "Add"
15) On license-config screen select "Locked license file (no server running)" and point to edit ptc_li-4.0.dat
16) Click "Next"
17) "Shortcut Location(s)",check "Desktop" and "Program Folder",change the Startup Directory to "C:tempProE" (this step is optional)
18) Click "Next"
19) On this screan is more optional configuration, make sure all boxes remain un-checked
20) Click "Install"
21) The installation process will begin?..
22) When ask you remove Disk 1 and insert Disk 2.
23) Click OK
24) The installation process will continue?.
25) Remove Disk 2 and insert Disk 3
26) Click OK
27) The installation process will continue?.
28) Remove Disk 3 and insert Disk 1
29) The installation process will continue automatically
30) When the installation is complete, click Next.
Read more: http://wiki.answers.com/Q/How_do_you_install_pro-e_3.0#ixzz17sdJJHjq
Subscribe to:
Comments (Atom)